One. How to connect the water tap.
First, attach the pipe fitting to the two hoses; then, insert the hoses through the openings at the bottom of the faucet; next, insert the lower hose's copper connector into the faucet and tighten it securely; be careful not to use excessive force during tightening; finally, secure the faucet and connect the cold and hot water pipes from the lower triangular valve.
Two-outlet water filter faucet connection instructions.
Step 1: Install a portion of the product on the work surface.
Attach the decorative ring and rubber pad (with the decorative ring on top and the rubber pad on the bottom) to the threaded pipe. Then, position the threaded pipe at the bottom of the faucet and insert it into the mounting hole in the countertop.
Step two: Secure the faucet.
First, insert the copper pad through the threaded pipe from below. Then, use your hand or a wrench to tighten the copper nut upwards until it is securely fastened.
Step 3: Assemble the pipes.
1. Connect the red pipe (water inlet) to the municipal water valve.
2. Connect the blue pipe (water filter) to the inlet of the water filter.
3. Connect the white pipe (water outlet pipe) to the outlet of the water filter.
Step four: Check for airtightness
Open the water supply valve. Then, open and close the control valve on the clean water faucet, and check for leaks at all connections. If leaks are present, tighten the leaking connection components.