1、The installation of switch panels should be carried out after the installation of the lighting fixtures. Switches must be connected in series on the power line. Use sealed or protective outlets in humid environments. The verticality of the panels should not deviate by more than 1mm. The gap between panels installed in rows should not exceed 1mm.
2. All outlets must be connected with the neutral wire on the left and the live wire on the right, with the grounding wire for three-hole outlets connected to the top. Furthermore, there should be no exposed copper wires inside the outlet box, and the protective wire must be connected to the top for three-phase outlets.
3. After installing the switch panel for the entrance cabinet, it should be easy to use. Switches on the same wall and at the same level must be arranged in the same vertical line and in a commonly used order.
4、The wires behind the switch panel and outlet should be neatly arranged and formed into a wavy shape, then placed inside the box.
5. Wiring on the switch panel is connected using a crimp method. The wire ends are stripped to 10mm, inserted into the terminal hole, and secured with screws. If the terminal hole is too large or the screws are too short, the wire cannot be crimped. In this case, the wire ends can be trimmed and bent into double wires for insertion.
6. Switches should be installed on live circuits. When multiple switches are on a single panel, each switch should be wired independently, and the wires from each switch should be individually run through conduit. The number of switches should correspond to the number of conduit entries connected to the junction box. When the switch is flipped upwards, it turns off the power. When installing a toggle switch, the red indicator mark should point upwards. Ensure that the switch is installed correctly, with the lower part of the toggle switch facing downwards (open position).
7. For multiple outlets on a switch panel, some have already been connected using edge strips; for other outlets, individual wires need to be connected in parallel. The live, neutral, and ground wires within the outlets must be connected according to the specified positions and should not be incorrectly connected.
Note: When installing switch panels, neatly arrange the connected wires and wire connections inside the junction box, ensuring they are securely fastened. Then, attach the panel to the junction box and fix it with screws. Ensure the panel is level and flush against the wall, with no gaps. After securing the lower panel, cover it with the decorative surface. We recommend hiring a professional installer for this task.