One: How to remove a broken pipe fitting.
1. You can purchase pipe joint removal tools from local hardware stores. Then, insert the tool into the broken joint and rotate it clockwise to tighten it. After that, rotate it counterclockwise to remove the broken joint.
2. Prepare a pair of nippers, a chisel, and a hammer. Then, use the hammer and chisel to break apart the broken water pipe joint, and then use the nippers to remove the broken water pipe joint.
Two. How to remove old pipe connections.
1、The joints of most pipes are typically bonded using hot melt glue or other adhesives. Therefore, removing pipe joints can be quite difficult. If possible, avoid removing the joints. If removal is necessary, the pipe joints can be cut off with a saw and then reconnected.
2、When making cuts at the joints, we must avoid making them carelessly. The pipes and saw blades must be level, and the joints should be cut smoothly. If the cut results in a rough joint, we can use sandpaper or sand the concrete surface to smooth and level the pipe joints.
Three. What to do if the pipe joint is rusted?
You can first apply rust remover to the rusted areas of the pipe joints, wait for 10 to 20 minutes, and then remove the rust. After that, use a pair of pliers and a wrench to remove the rusted pipe joints.