One,Rubber paintWhat should I do if it's sticking?
1、Clean with degreasing agent: Choose cotton swabs or thicker paper towels dampened with a degreasing agent. Apply to areas where the rubber has melted, and gently wipe to remove.
2、Clean with vinegar: Apply vinegar, let it dry, and then wipe with a paper towel. This will effectively remove the dirt.
3、Talc powder: Apply an isolation agent or talc powder to the surface to reduce stickiness; rinse the surface with diluted bleach.
4、Wind oil: A quick wipe with wind oil will remove it; try it.
5、Alcohol: Dampen a cloth with alcohol and wipe repeatedly. If the adhesive has hardened, first wipe it with warm water to soften it, and then use alcohol to remove it.
6、Foaming agent: Poly(siloxane-poly(alkylene oxide)) is also known asFoaming agent, water-soluble silicone oil. It is produced by hydrolyzing chlorosilanes to produce poly(siloxane), which is then condensed with polyethers. Yellow or brownish-yellow, viscous, transparent liquid. Wipe away.
Two. How to resolve rubber paint adhesion issues
Reasons for rubber paint adhesion failure:
1、Excessive use of slow-drying solvents in the paint prevents the solvents from evaporating.
2、Insufficient or absent addition of curing agent.
3. The coated surface is dirty and contaminated.
4. During construction, sudden weather changes, rainy season conditions, and high humidity levels.
5. Coating thickness, insufficient time between coats, and overlapping of packaging before the coating has dried.
Rubber paint adhesion problem:
1、Select an appropriate dry solvent and diluent, and avoid adding excessive amounts.
2、Add the curing agent in the specified ratio.
3. Prevent the coated surface from being contaminated.
4. When working in adverse weather conditions, ensure adequate ventilation to allow solvents to fully evaporate.
5. After the lower layer is completely dry, apply the upper layer. After the coating dries, package and ship.