One、How to quickly remove waterproof coating
1、Can be applied using tools such as scrapers or hammers, suitable for large wall surfaces or relatively flat floors.
2. Alternatively, a degreasing agent can be applied to large areas to dissolve the contaminants, followed by rinsing.
3. If the stain is from water-based waterproof coating, it can be wiped off immediately with water. If the nylon fabric is contaminated with waterproof coating, first apply lard and rub, then wash with detergent and rinse with clean water.
4、If waterproof coating comes into contact with clothing.，Can be removed using organic solvents such as gasoline.。
II. important considerations for using waterproof coatings
1. When applying waterproof coatings, the ambient temperature must not be below 5°C. The environment must also be dry. Construction is not allowed in rainy or wet conditions, or on sites with standing water.
2. When using waterproof coatings, be careful not to splash into your eyes or mouth. If splashed, immediately take appropriate measures, such as rinsing with water. If the irritation persists, seek medical attention promptly.
3、After applying the waterproofing coating, it is necessary to wait for it to completely dry before proceeding with other surface treatments.
4、The drying time for the waterproofing coating is approximately 3 days. If the environment is humid, this time should be extended.