One, What to use to clean anti-corrosion coatings?
1. Remove the coating using acetone or banana water.
Apply acetone or banana water to the coating, and use a brush to repeatedly scrub until the stain softens and detaches from the fabric. Rinse with clean water after. If the stain does not come out after the first wash, repeat the scrubbing process multiple times until it is completely removed.
2、Use white liquor and alcohol to remove the coating.
Alcohol can dissolve various stains. To remove stains from clothing, soak the affected areas with 60°C white liquor or a 8:2 alcohol-water mixture (95% alcohol), for approximately 30 minutes. Then, wash with water until clean, followed by rinsing with clean water.
3、Use fresh egg white to remove the coating.
First, use fresh egg whites to remove any remaining adhesive from the fabric surface. Then, individually wipe away any loose particles. Finally, wash the fabric in soapy water and rinse thoroughly with clean water.
II. How to wash clothes if anti-corrosion coating gets on them
1. Prepare clothing that will be used for applying the coating.
2. Pour water and alcohol into a basin and mix thoroughly (the water should be enough to submerge the clothing).
3. Place the areas coated with paint in alcohol solution.
4、Soak for approximately 15 minutes.
5. After the allotted time, remove the garments and gently rub them with your hands.
6、The coating has been thoroughly cleaned.