I. Simple Construction Plan
1. Use a utility knife to cut the rubber sound insulation board to the desired size.
2. Apply adhesive to the back of the cut rubber sound insulation board.
3. Directly apply the coated rubber sound insulation board to the wall or use the self-adhesive rubber sound insulation board with a backing.
Application: Suitable for simple finishing of existing, already-decorated surfaces where minimal effort and noise reduction are desired.
Two. Cost-effective solutions
1. First, use a universal brush to apply the sound-absorbing felt to the ceiling and then attach it.
2. Then, apply adhesive or use the self-adhesive rubber sound-absorbing board to the sound-absorbing felt.
Application Scope: Suitable for applications where moderate performance is desired, but enhanced sound insulation is also a priority.
III. Standard Construction Plan
Installation Steps:
1. First, apply the soundproofing felt to the ceiling.
2. Fill with sound-absorbing cotton/rubber.
3. Apply another layer of soundproofing felt.
4. Seal the gypsum board.
Scope of Application: Suitable for applications requiring slightly higher performance and tolerance for complex construction processes.
IV. Professional Construction Plan
1. First, apply the soundproofing felt.
2. Fill with sound-absorbing cotton/rubber.
3. Seal the gypsum board (can be used or not, the purpose is to facilitate installation and fix the acoustic panel).
4. Install acoustic panels.
Application: Suitable for applications requiring high quality and demanding performance.
V. Highly Specialized Construction Solution
1. First, apply sound-absorbing felt to the wall.
2. Fill with sound-absorbing cotton/rubber.
3. Apply another layer of soundproofing felt.
4. Seal the gypsum board.
5. Apply sound-absorbing material.
Application: Suitable for environments with extremely high noise levels, such as KTVs, nightclubs, drum rooms, and factories.