One. When maintaining wood treated with anti-corrosion agents, what should be paid attention to?
1、Must be applied at a temperature of 8℃ or above.
2、Preserved wood must be dry.，Moisture content should not exceed15%。
3、Before applying wood wax oil, the wood surface must be sanded with fine sandpaper and wiped clean to ensure a smooth surface.
4. Thoroughly mix before use; no dilution required. If the product has a high viscosity, a small amount of the specified thinner can be added, but the amount should not exceed 10%.
5. Apply the wood wax oil using a soft bristle brush, applying a thin, even coat along the wood grain direction. After application, remove any excess wood wax oil. The application should be minimal; avoid applying too thickly. After the surface is completely dry, lightly sand and wipe clean the coated surface. A second coat can be applied one to two hours after the first.
6. Before applying, first moisten a clean cloth evenly and squeeze out excess wax oil. When applying, exert even pressure, avoiding excessive or insufficient force. First, wipe the surface horizontally and vertically in alternating directions several times, and finally, wipe evenly along the wood grain to ensure that the wood wax penetrates the wood grain thoroughly. Allow the surface to dry completely, then lightly sand and wipe the surface, and repeat the same steps.
Two. important considerations when applying wood stain for anti-corrosion wood.
1. In most cases, outdoor wood preservation should be performed once a year. However, in harsh or very humid environments, it may be necessary to apply oil every six months.
2. If the substrate has not been painted with any color previously, and you are applying a clear coat, you can apply the clear coat directly.
3. If the oil-based paint is colored, it is best to repaint with the original color or a darker shade to cover the previous color.