One, what glue is used to stick wood paper?
1、White glue
White glue is one of the most widely used, most extensively applied, and historically oldest water-soluble adhesive, produced through polymerization of vinyl acetate monomer under the action of a catalyst. It is a thermoplastic adhesive that can be cured at room temperature, cures quickly, and exhibits high bonding strength. The bonded layer possesses good flexibility, durability, and resistance to aging.
2、No-nail adhesive
Construction adhesive, also known as "no-nail glue" or "liquid nails" in some regions, is a high-strength, multi-functional adhesive for construction applications. It exhibits good resistance to cold, moisture, and chemical corrosion.
3、Wallpaper adhesive
Wallpaper adhesive, also known as wall paper adhesive, is a construction-specific adhesive product made from natural plant-based potato starch, which is processed using high-molecular-weight extracts. It is highly environmentally friendly.
4、Double-sided adhesive
Double-sided adhesive tape consists of rolls of adhesive tape made from paper, fabric, plastic film, elastic, or resin-based pressure-sensitive adhesives. It can also be used to adhere wood-grain paper; however, the application is simple, but the adhesion is not very strong, and it cannot be used for adhering wood-grain paper to walls.
Two. How to use the glue for decorative wood veneer paper.
Next, we will introduce the most commonly used methods for applying white latex:
1. Before using the white glue, it is necessary to thoroughly clean the surface of the object to be bonded. If the surface is dirty, it will affect the final bonding effect. You can use a towel and water or cleaning agent to wipe off the dirt on the surface.
2、When applying the adhesive, ensure even and appropriate coverage. If applying by hand, use a brush to evenly apply the white glue to the surfaces to be bonded.
3. After coating, bring the two bonded surfaces together, then apply pressure to them. Use tools such as ropes to fix the bonded surfaces and ensure even pressure. Typically, after two hours of pressure, the bonding surfaces of the two materials will be properly aligned.
4. Finally, allow the adhesive to fully cure, which typically takes 24 hours. This can occur at room temperature, or it can be accelerated by heating. The exact curing time will depend on the specific circumstances. It is also important to note that the curing time of the adhesive will be affected by the temperature and humidity in the room. In low-temperature or high-humidity environments, the adhesive will require a longer curing time, while in low-temperature or high-humidity environments, the curing time will be reduced.