One. Do composite materials have a smell?
Engineered wood products may have a slight odor, typically due to the natural scent of the wood and a small amount of adhesive. Because engineered wood products use very little adhesive, they generally do not have a strong or unpleasant odor.
Two. What are the characteristics of composite materials?
1、The raw materials for composite materials are thoroughly dried, ensuring uniform moisture content even in large-section and long-length materials, resulting in minimal cracking and deformation compared to solid wood.
2. Before gluing, remove defects such as knots and rot from the composite material. This allows for the production of materials with fewer or no defects.
3、The composite material retains the natural texture of wood, resulting in an aesthetically pleasing appearance.
4、Tear resistance、Outperforms solid wood in physical properties, material uniformity, and stress resistance.，Configurable based on board strength.，Enhance its strength properties。Experiments show，Comparable to solid wood.1.5Multiply。
5. Before gluing, the boards can be pre-treated with medication. Even for large or oversized materials, sufficient medication can be applied internally to impart excellent corrosion resistance, fire resistance, and pest resistance.
6. According to the required shape, prefabricated materials can be manufactured in straight or curved forms. Depending on the required strength, they can also be manufactured with gradually varying cross-sections along the length, or with profiles such as I-beams and hollow square shapes.
7. Manufacturing curved composite materials for use as timber structural components is an ideal solution.
8. Due to different applications, the composite material must possess sufficient bonding performance and durability. Therefore, the manufacturing process of the composite material requires good technical expertise, appropriate equipment, and robust quality management and product inspection.
9、Compared to solid wood, engineered wood has a lower yield rate, resulting in higher product costs.