I.Composite materialMaintenance methods
1. Ensure thorough cleaning. Use a clean, soft cloth to regularly wipe the surface of the furniture, avoiding the use of ordinary water, damp cloths, or abrasive cloths on surfaces, mirrors, and glass. Avoid contact with acids, alkalis, and oils. If possible, high-purity industrial alcohol can be used to clean the surface of the furniture.
2. Regular Maintenance: For typical joinery furniture, a focused cleaning and maintenance cycle can be implemented quarterly. After wiping the surface with a soft cloth to remove dust, apply a uniform coat of polishing wax to the bed headboard surface. The polishing wax protects the joinery furniture's paint layer from moisture, scratches, and heat damage.
3. Prevent impact. Do not use tools such as hammers to strike the surface of the furniture panels, nor should you use knives to cut or scrape the surface. If you notice any gaps or separations in the panel of a furniture piece, repair them promptly. Otherwise, over time, the cracks will widen and may even cause warping, leading to complete damage.
Two. important maintenance guidelines for integrated joint board materials.
1、Since the main materials used in integrated finger joint furniture are wood, it is important to avoid contact with corrosive liquids to prevent damage to the integrated finger joint furniture and to extend its service life.
2. Cleaning is the most important way to maintain composite panels. once dust or dirt is detected on the surface, it should be cleaned with a dry cloth. For more stubborn stains, professional cleaning agents can be used.
3. Reducing direct sunlight exposure on composite panels: Prolonged exposure to direct sunlight can cause wood to crack and deform.
4. If the room is excessively humid, it can also cause mold growth on the tongue and groove panel composite material. Therefore, regular ventilation and moisture control are essential. This will also ensure that the clothing inside the tongue and groove panel composite material remains clean and dry, preventing mold growth.