One. What is the load-bearing capacity of a large core board?
This question is difficult to answer definitively, as the core material and its load-bearing capacity vary significantly.
The plywood surface is smooth and free of warping, distortion, blistering, and depressions; the veneers are evenly and neatly aligned, with small gaps; the veneers are free of rot, breakage, insect holes, and knots. This results in a relatively higher load-bearing capacity.
Regarding the load-bearing capacity of large-span steel plates, it is best to consult with professionals based on the specific material, thickness, and manufacturing process of the plates.
Two. important considerations for using large core panels.
1、Between each piece of plywood, install at least three wooden strips with a height of 125px or more, ensuring they are neatly arranged to prevent warping and bending, thereby ensuring a long service life and stable performance.
2. Due to the relatively thin surface of the particleboard, it is strictly prohibited from being impacted by hard objects or blunt instruments. Therefore, caution must be exercised during use.
3. Plywood is more stable than solid wood, but is susceptible to moisture. When installing, avoid using it in humid environments such as kitchens and bathrooms.
4. Sub-veneered wood panels with an unqualified moisture content are prone to cracking and deformation. The moisture content should not be too high or too low; it is recommended to be between 10% and 13%. Maintain good indoor ventilation, prevent moisture, and protect against direct sunlight.