One、How to cut a 45-degree angle on wood panels
1、Attach two wooden strips to the stool.
2. Secure the wood to be cut in the center position.
3、Use a ruler to clearly mark the 45-degree angle cut line on the wood.
4. Use a saw to cut along the marked cutting line.
Note: Cutting wood is a technical task that requires expertise. We recommend having a professional assist with the cutting to avoid errors or personal injury.
Two. When cutting wooden panels, pay attention to creating the angle.
1、Before creating the angle, it is essential to accurately measure and mark the angle using a ruler or caliper.
2. If cutting at an angle, the principle is to remove any portion exceeding the marked dimension by 0.5mm to prevent bending and warping at the edge of the board due to the rebound of the top edge during cutting, ensuring that the angle meets the required specifications.
3. For seamless assembly panels, it is recommended to use corner joints to ensure a seamless appearance.
4、All products after forming corners must be thoroughly inspected to ensure accuracy.